- Compact
- Triple fail safe features allow unattended operation
- Replaceable silica heat
- Simple to clean (Teflon screw cork)
- Free from pyrogens
- Free from heavy metals
- Low temperature distillate
- In the All Quartz Double Distillation the components coming into
contact with water are quartz glass parts which, contrary to ordinary
laboratory glass are non-hygroscopic and thus resistant to H2 These properties warrant the high purity requirement a distillate must fulfill.
- Fail safe devices like solenoid valve avoids cold water wastage
during power failure, the optimization of cooling water volume is
controlled by a cooling water flow meter, in addition to this the
equipment is fitted with PTS which maintains sufficient water to the
boiler.
Output Capacity
| Cooling water feed
| Biological Purity
| RH/PH
| Conductivity |js / cm
| Distillate Temperature
| Power required
|
1.5 liters / hr
| 60 liters / hrs (approx)
| PYROGEN FREE
| 6.9 – 7.0
| 0.5-0.9
| 75° ± 5°C
| 200 – 240 V 3KW Single Phase
|
4 liters / hr
| 90 liters / hrs (approx)
| PYROGEN FREE
| 6.9 – 7.0
| 0.5-0.9
| 75° ± 5°C
| 200 – 240 V 3KW Single Phase
|
Optional:
The Automatic Electronic Dual cut-off system is used
along with the Water Distillation unit to protect the distiller during
water supply failure. Its cuts off the power supply in two cases.
a) In case of water failure to condenser, the power supply to the unit is cut-off automatically, by mean of Flow Switch
b) In case of water failure to the Boiler, the power supply to the unit is cut off automatically by means of pt-100 sensor.
2) Quartz Storage Vessel for collection of distillate.
3) Additional Bulb Condenser to bring down the temperature of distillate.
4) MCB ( prevents system from any short circuit).
5) Water Softener/DM Plant/Pre-filter/ 5 Stage RO System to reduce the scaling in the boiler.
6) Water Circulator to avoid wastage of cooling water
